Expert Answers about Chevrolet Snow Plow Parts
- Will a Front Mount Hitch and Snow Plow Fit a 2007 Jeep Wrangler with Super Drive Bumper
- Trailer hitch and snow plow manufacturers do not test their products on vehicles that have been modified with aftermarket parts. Therefore, I would not be able to confirm fitment of a front mount trailer hitch or snow plow on your 2007 Jeep Wrangler. Your best option in order to attach a snow plow to the vehicle would involve putting the stock Jeep bumper back on. There is a very small likelihood that the snow plow would clear the front bumper assuming that the hitch fits.
If you install...
view full answer... - Snow Plow for a 2005 Honda Pilot
- We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work.
The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328.
This particular plow is 82" wide and 19" tall.
view full answer... - How to Install SnowBear Plow to 2021 GMC Sierra 1500
- To use a SnowBear plow with your 2021 GMC Sierra 1500 you'll need to install a front mount hitch like part # C31088 (does not fit a 2.7L Turbo) and then use one of their hitch-mount snow plows like the Personal Snowplow # SB324-080 which is 82" wide x 19" tall and comes with an electric winch to raise and lower the hitch.
The last time SnowBear made a custom mount for their WinterWolf snow plows for a GM truck application was for the 2018 model year which is why you'll have to switch everything...
view full answer... - Lift Cylinder vs Angle Cylinder For Western Hydraulic Snow Plow
- The parts are different and cannot be interchanged; an angled cylinder simply angles the blade, while the lift cylinder like # 3371304203 you mentioned will raise it vertically.
The part you mentioned is for a Western Hydraulic snow plow, and for an angled cylinder we have the Replacement Angle Cylinder for Western Hydraulic Snow Plow - 10" Stroke - Single Acting # 3371304202 which is equivalent to to Western part number 56614.
view full answer... - Is Draw Tite Hitch 65080 Strong Enough to be Used with Snow Plow
- Yes the Draw Tite front hitch part # 65080 is strong enough to be used with a hitch mounted snow plow like the Detail K2 part # K2AVAL8219.
view full answer... - Snow Plow Setup for a 2016 Ram 3500
- I do have a front mount hitch and snow plow compatible with your 2016 Ram 3500 but according to American Expedition Vehicles (AEV), there is not a front mount trailer hitch compatible with the AEV front bumper installed on your vehicle therefore, you would not be able to use a snow plow on the Backcountry edition of your 2016 Jeep Wrangler.
For a snow plow and front mount hitch setup for your Ram, I recommend using both the Curt Front Mount Trailer Hitch Receiver part # C31067 and the...
view full answer... - Replacement Base Lug With 3/4" Hole For Western Isarmatic Snow Plow
- The Replacement Base Lug for Western Snow Plow - 3/4" Hole # 3371306370 is a direct comparison/replacement for Western Lug Cap part number 25968. This part fits Western Isarmatic snow plows and have a 3/4" lug hole so it sounds like this is the part you are looking for.
view full answer... - Are There Custom SnowBear SnowPlow Mounting Brackets for a 2023 Chevy Colorado
- I do have an option for you but I checked with SnowBear and they only offer Custom SnowBear SnowPlow Mounting Bracket for a Chevrolet Colorado up to 2018. That said, you may be able to switch to the hitch mount type of attachment which is much more versatile. In which case, you'd need the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120. In order to confirm, you'd need to make sure your dowel's are spaced apart 33". If so you can use the Draw-Tite Front Mount Trailer Hitch...
view full answer... - Replacement 9-Pin Male and Female Plugs for Fisher and Western Snow Plows
- The matching part to the Replacement Harness for Fisher and Western Snow Plows - 9-Pin Male Plug # 3371315310 is the Replacement Plow Harness for Fisher and Western Snow Plows - 9-Pin Female Plug # 3371315315.
view full answer... - How To Mount a SnowBear ProShovel SnowPlow On a 2009 Chevy Silverado 1500
- The SnowBear ProShovel SnowPlow mounts using a standard 2" receiver tube according to my research therefore in order to use this on a 2009 Chevrolet Silverado 1500 you only need the Curt Front Mount Trailer Hitch Receiver part # 31322 which is a drill free option that can be used for several other purposes when you are not plowing such as helping back-up a trailer, mounting a winch, etc.
If your SnowBear SnowPlow does not mount using a standard 2" receiver tube then please re-verify the model.
view full answer... - Front Mount Hitch and Snow Plow For 2017 Toyota Tacoma
- I do have some options for you but there is currently not a front mount hitch available for the 2004 Toyota 4Runner. However there are custom fit brackets available with the snow plow options for the 4Runner. I recommend the SnowBear Winter Wolf Snowplow part # SB324-166 with the custom mounting brackets for the 4Runner part # SB397-049. The SnowBear Plow is a reliable brand from our experience, it also has an electric actuator so the plow can be controlled from the cab.
There is a front...
view full answer... - SnowBear Plow For 2002 Nissan Xterra SE
- The 5XM5 Universal Cross Member for SnowBear Snowplows part # SB324-060 would be needed on the 2002 Nissan Xterra if you already have a snow bear plow that does not have a cross member. It would attach to the vehicle specific brackets for the 2002 Nissan Xterra part # SB397-052.
If you do not already have a SnowBear snow plow I recommend SnowBear Winter Wolf Snowplow part # SB324-167 which comes with a convenient wireless remote and in-cab toggle switch as an alternative. You would need...
view full answer... - How to Use Older Snowbear Snow Plow on 2006 Ford F-150
- I contacted SnowBear and the SNB-SB200 plow needs a bracket fit part # SB397-105 to fit the 2006 F-150. Since the snow plow is an older model it did not come with the cross member so you do need the cross member to attach the plow to the truck part # SB324-060. If the electric winch and components need to be replaced on the SNB-SB200 you need part # SB263-282.
view full answer... - Brackets for SnowBear Snow Plow on 2013 Jeep Wrangler Rubicon
- I checked with SnowBear and the correct bracket kit for a 2013 Jeep Wrangler Unlimited Rubicon with 4-wheel drive and the standard factory bumper is the Custom Mounting Bracket Kit # SB397-101.
This kit is designed to fit SnowBear Hydraulic or Winter Wolf snow plows though if you let me know the model number of your plow I can check with SnowBear for compatibility.
view full answer... - Will the 5XM5 Universal Cross Member for SnowBear Snowplows Work With Older Models
- The 5XM5 Universal Cross Member for SnowBear Snowplows part # SB324-060 works with all SnowBear Snow Plows, both the older and newer models. I even double-checked some of the dimensions and they are in-line with what you provided.
view full answer... - Custom Mounting Bracket Kit for SnowBear SnowPlows Require Modification 2015 Chevy Colorado
- The Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows part # SB397-133 is indeed a SnowBear product. The mounting bracket kit is a direct fit for your 2015 Chevy Colorado and will not require any additional cutting, drilling, or grinding in order to install.
The universal crossmember you are referring to is the 5XM5 Universal Cross Member for SnowBear Snowplows part # SB324-060. If the snow plow you currently have does not already have this mount then yes, you...
view full answer... - Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
- Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
view full answer... - K2 Snow Plow Mounting Brackets for 2019 Ram 1500
- For a K2 snow plow the correct mounting brackets for a 2019 Ram 1500 would be the part # K264FR that you referenced.
view full answer... - Snow Plow Compatibility with 1991 Jeep YJ Wrangler
- Both the Curt # 31408 and Draw-Tite # 65048 mount to the top of the bumper as you referenced. I believe you are correct that the hitch mounted snow plow won't work with these, because both SnowBear and Detail K2 snow plows we carry all use custom brackets versus a front hitch for your vehicle.
I've linked the page to the snow plows compatible with your vehicle and all the SnowBear plows use the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-024.
view full answer... - What Snowbear Plow Brackets Fit 1994 Chevy Blazer
- The 5XM5 Universal Cross Member for SnowBear Snowplows # SB324-060 that you referenced is not vehicle specific as it fits Snowbear plows. The SnowBear plow brackets that fit your 1994 Chevy Blazer is the part # SB397-000.
view full answer...
Go To Results